Gas Struts for Camper Shell: Reliable Rear Hatch & Side Window Lift Supports for Pickup Truck Caps
A camper shell rear door that won’t stay open over your head. A fiberglass topper hatch that slowly creeps down while you’re loading gear. Side window struts that have lost their pressure after a few seasons of sun, rain, and road vibration. If you own, build, or service pickup camper shells, these are the everyday failures that turn a simple cargo job into a frustrating — and sometimes unsafe — experience.
TieYing gas struts for camper shells are purpose-built for the rear hatch doors and side access windows of truck caps, toppers, canopies, and pickup campers. Nitrogen-charged and precision-damped, they hold the hatch securely open at any angle, assist smooth opening and closing, and resist the constant vibration, temperature swings, and weather exposure of life mounted on a pickup bed.
As a China-based OEM gas spring manufacturer with 23+ years of engineering experience, TieYing supplies camper shell struts to truck cap manufacturers, pickup upfitters, canopy distributors, and aftermarket parts suppliers worldwide, as well as direct replacement units for the major shell brands. Every strut is built to exact force, stroke, and fitting requirements and backed by global quality certifications.
Not sure which strut fits your camper shell? Send your hatch weight, dimensions, or existing OEM part number → Get a free fitment recommendation within 24 hours.
What Is a Camper Shell?
A camper shell (also called a truck cap, topper, canopy, or pickup camper canopy) is a rigid, weather-sealed enclosure mounted over the bed of a pickup truck. It converts the open cargo bed into a lockable, protected space used for camping, work, storage, and overland travel. Camper shells are most commonly made of molded fiberglass, with aluminum commercial canopies also widely used for trade and fleet applications.
The moving parts that require gas strut support are:
- Rear hatch door — The large rear door that hinges at the top and opens upward for full bed access. This is the primary application for camper shell gas struts and almost always uses two struts, one on each side.
- Side windows / side access doors — Hinged or sliding side windows and smaller side doors that use compact struts or props to hold open.
- Pop-top / elevating roof — On pop-top camper shells, struts assist lifting and holding the raised roof section.
- Compartment doors — On commercial and work canopies, side tool cabinets and storage compartments use smaller lift supports.
Why Camper Shell Struts Are Not Generic Gas Struts
A rear hatch rotates through a wide arc around its top hinges while the pickup bed and shell frame flex under road load. Camper shell struts must match this specific geometry, provide the correct hold force against the hatch’s weight, and maintain consistent performance through vibration and outdoor weather. A correctly specified strut holds position reliably; an undersized or generic unit will drift down, bind, or fail early.
How Camper Shell Gas Struts Work?
TieYing camper shell struts are sealed, high-pressure nitrogen gas springs with a precision piston and seal system.
- On opening, compressed nitrogen drives the piston rod outward, counterbalancing most of the hatch’s weight so the door lifts easily and stays where you position it.
- In the hold position, internal gas pressure balances the door weight, keeping the hatch open without a manual prop rod.
- On closing, controlled motion brings the hatch down smoothly; optional damping cushions the final movement to prevent slamming.
- The piston rod passes through a wear-resistant guide bushing and nitrile seal, engineered to retain pressure and resist the dust, moisture, and vibration encountered on a working pickup.
Because gas pressure responds to temperature, struts can feel slightly firmer in heat and softer in extreme cold — a key reason to choose a unit rated for your full operating range rather than a cheap, narrow-range replacement.
Core Benefits of TieYing Camper Shell Gas Struts
✅ Secure stay-open hold — The rear hatch stays firmly open at your chosen angle, protecting your head and leaving both hands free for loading and unloading.
✅ Easy, balanced lifting — Nitrogen assistance cancels most of the hatch weight, so opening a large fiberglass door takes minimal effort.
✅ Anti-slam / controlled closing — Optional end-of-stroke damping cushions the door, protecting the shell frame, hinges, glass, and seals from impact.
✅ Vibration & weather resistant — Built to endure road vibration, UV exposure, rain, dust, and temperature swings from -40°C to 80°C.
✅ Direct OEM replacement — Cross-references major truck cap brands and part numbers for bolt-on fitment with no drilling or modification.
✅ Long service life — Rated for 150,000+ cycles, far outlasting budget aftermarket struts.
✅ Matched pairs — Supplied as balanced left/right sets for even, symmetrical door travel and no twisting stress on hinges.
Camper Shell Strut Size Chart & Standard Dimensions
Camper shell rear hatches and side windows use well-defined size ranges. TieYing camper shell struts carry the TY-CSS prefix. Most rear doors use 10mm ball-socket fittings; confirm your existing fittings before ordering.
Rear Hatch Door Struts (Primary)
| TieYing Model | Extended Length | Compressed Length | Stroke | Force (per strut) | Typical Camper Shell Application |
|---|---|---|---|---|---|
| TY-CSS-120-20 | 12 in (305 mm) | 7.6 in (193 mm) | 4.4 in (112 mm) | 20–25 lbs / 89–111 N | Compact & mid-size pickup caps, small rear hatches |
| TY-CSS-140-25 | 14 in (356 mm) | 8.7 in (221 mm) | 5.3 in (135 mm) | 25–30 lbs / 111–133 N | Mid-size truck caps, common retrofit size |
| TY-CSS-150-30 | 15 in (381 mm) | 9.3 in (236 mm) | 5.7 in (145 mm) | 30–35 lbs / 133–156 N | Standard full-size fiberglass camper shells — most popular rear hatch size |
| TY-CSS-170-38 | 17 in (432 mm) | 10.6 in (269 mm) | 6.4 in (163 mm) | 38–42 lbs / 169–187 N | Full-size high-roof & heavy hatch doors |
| TY-CSS-200-45 | 20 in (508 mm) | 12.2 in (310 mm) | 7.8 in (198 mm) | 45–55 lbs / 200–245 N | Large commercial canopies & tall rear doors |
Side Window / Side Access Struts (Secondary)
| TieYing Model | Extended Length | Stroke | Force (per strut) | Application |
|---|---|---|---|---|
| TY-CSS-070-10 | 7 in (178 mm) | 2.6 in (66 mm) | 10–15 lbs / 45–67 N | Hinged side windows, small vents |
| TY-CSS-090-15 | 9 in (229 mm) | 3.4 in (86 mm) | 15–20 lbs / 67–89 N | Side access windows & small side doors |
| TY-CSS-100-20 | 10 in (254 mm) | 3.8 in (97 mm) | 20–25 lbs / 89–111 N | Larger side doors & pop-top assists |
Sizing Notes
- Rear hatch forces are stated per strut; with two struts fitted, total support is double the per-unit value.
- Standard sizes are stocked for fast shipment. Fully custom struts are available from 5 in (127 mm) to 28 in (711 mm) extended length with force from 5 lbs (22 N) to 150 lbs (667 N).
- Always match both length/stroke and force — a strut that is the right length but wrong force will either fail to hold or make the door hard to close.
- Send your existing part number or a photo of the fitted strut and we’ll confirm the exact equivalent, including end fittings and mounting brackets.
Samples are available for fit and hold-force validation before volume orders.
End Fittings & Mounting Hardware
Camper shell struts use standardized, serviceable fittings that allow the angular movement of a top-hinged hatch.
Common End Fittings
- 10mm ball socket (female) — The standard fitting for camper shell rear hatches. A reinforced nylon socket with a spring-steel retaining clip snaps onto a 10mm ball stud and pivots freely through the door’s arc.
- 8mm ball socket — Used for smaller side windows and light compartments.
- 13mm ball socket — For heavy-duty commercial canopies and high-force rear doors.
- Eyelet end — A ring fitting bolted in place on older or heavy-duty shells.
- Clevis / blade end — Used on specialty OEM and work-canopy applications.
Mounting Brackets
- L-brackets with integrated ball studs for surface mounting on the shell frame and hatch
- Flat-base brackets for low-profile, flush mounting
- Adjustable sliding brackets that let you fine-tune position and effective hold force after installation
All fittings and brackets are available in zinc-plated carbon steel, black powder coat, or 304/316 stainless steel for coastal and salt-road environments.
Solutions by Camper Shell Type
Different truck cap constructions call for different strut specifications.
Fiberglass Molded Camper Shells
The most common recreational truck cap. Large, relatively heavy glass-filled rear hatches typically use two 15″–17″ struts in the 30–42 lb range. A matched pair is essential to keep the wide door traveling square without twisting the hinges.
Aluminum Commercial Canopies
Lightweight but hard-working trade and fleet canopies with side tool cabinets and durable rear doors. Corrosion-resistant finishes and heavy-duty fittings withstand daily commercial use, gravel roads, and winter salt.
Pop-Top / Elevating Roof Camper Shells
Struts assist lifting and holding the raised roof, plus support the rear hatch. Smooth, reliable operation matters here because the roof is operated repeatedly at campsites.
Side Window & Access Door Configurations
Shells fitted with hinged side windows or side access doors use compact 7″–10″ struts that hold windows open for ventilation without allowing them to swing or slam in wind.
For oversized or unusually heavy custom hatches, our heavy-duty gas spring range delivers higher force and reinforced construction.
Solutions by Camper Shell Type
Different truck cap constructions call for different strut specifications.
Fiberglass Molded Camper Shells
The most common recreational truck cap. Large, relatively heavy glass-filled rear hatches typically use two 15″–17″ struts in the 30–42 lb range. A matched pair is essential to keep the wide door traveling square without twisting the hinges.
Aluminum Commercial Canopies
Lightweight but hard-working trade and fleet canopies with side tool cabinets and durable rear doors. Corrosion-resistant finishes and heavy-duty fittings withstand daily commercial use, gravel roads, and winter salt.
Pop-Top / Elevating Roof Camper Shells
Struts assist lifting and holding the raised roof, plus support the rear hatch. Smooth, reliable operation matters here because the roof is operated repeatedly at campsites.
Side Window & Access Door Configurations
Shells fitted with hinged side windows or side access doors use compact 7″–10″ struts that hold windows open for ventilation without allowing them to swing or slam in wind.
For oversized or unusually heavy custom hatches, our heavy-duty gas spring range delivers higher force and reinforced construction.
Camper Shell Strut vs Manual Prop Rod vs Standard Gas Strut
| Feature | TieYing Camper Shell Strut | Manual Prop Rod | Standard (undamped) Strut |
|---|---|---|---|
| Hands-free stay-open | Yes | Yes (manual set) | Yes |
| Assisted lifting | Yes | No | Yes |
| Holds at any angle | Yes | Limited positions | Yes |
| One-handed operation | Yes | No | Yes |
| Controlled / anti-slam close | Yes (damped option) | No | No |
| Balanced left/right support | Yes | No | Yes |
| Vibration & weather rated | Yes | Prone to wear / rattle | Yes |
| Best for | Daily-use camper shells | Temporary / budget | Basic lift without cushioning |
Recommendation: For a camper shell used regularly for camping or work, a matched pair of purpose-built struts (with damping where quiet closing matters) is the most reliable, convenient, and long-lasting choice over a manual prop rod or a generic undamped strut.
How to Choose the Right Camper Shell Struts?
- Weigh the rear hatch Weigh the complete door including glass, frame, seals, and hardware. Select two struts whose combined force targets roughly 60–80% of the hatch weight for a stable hold and easy closing.
- Measure extended length and stroke With the hatch fully open, measure center-to-center between the mounting ball studs (extended length), then measure the travel from closed to open (stroke). Measure mounting points, not the old strut body, since worn struts may not fully extend.
- Identify the end fittings Confirm ball stud size (most are 10mm) and bracket type. We supply matching fittings and complete mounting kits so replacements fit existing holes.
- Match the shell type & environment For coastal, salt-road, or winter use, choose stainless or corrosion-resistant finishes. For commercial canopies, specify heavy-duty fittings and higher cycle ratings.
- Always replace in pairs Even if only one strut has failed, replace both. Mismatched force causes uneven travel, hinge twist, glass stress, and premature failure of the new unit.
30-Second Camper Shell Selector
Send these four details for an exact recommendation:
- Hatch total weight: ____ lbs / kg
- Extended length (center-to-center, full open): ____ in / mm
- Fitting: ☐ 10mm ball ☐ 8mm ball ☐ eyelet ☐ custom
- Environment: ☐ recreational ☐ commercial/work ☐ coastal/salt ☐ extreme cold
Installation Guide & Safety Precautions
Before You Start
- Secure the hatch fully open with a sturdy prop rod or a helper before removing old struts. Never rely on a person alone to hold a heavy fiberglass door — a released hatch can fall without warning.
- Tools required: a small flathead screwdriver for retaining clips and a wrench/socket for mounting bolts.
- Verify orientation. Install struts with the piston rod pointing downward in the closed position so internal oil keeps the seal and guide bushing lubricated. Reversed orientation accelerates seal wear and gas loss.
Step-by-Step Installation
- Pry up the retaining clip on each ball socket and pull the socket straight off the stud. Do not twist or lever sideways, which can bend the stud or crack the socket.
- Compare the new strut to the old one to confirm length, force, damping, and fittings.
- Attach the cylinder (body) end to the lower mounting point on the shell frame first, pressing until it clicks.
- Attach the rod end to the upper point on the hatch, moving the door slightly to align the fittings.
- Confirm both ends are locked, then slowly cycle the hatch through its full range, checking for smooth lift, a stable hold, and even left/right travel with no binding.
Critical Mistakes to Avoid
- ❌ Do not manually force or compress the strut.
- ❌ Do not twist or bend the piston rod; this damages the guide bushing and seal.
- ❌ Do not use the strut as a mechanical end stop; ensure the hatch has bump stops that contact before full extension.
- ❌ Do not over-torque mounting bolts (typically 8–12 Nm for M8), which can warp brackets and cause binding.
- ❌ Do not fit a single strut to a hatch designed for a pair.
Maintenance to Extend Strut Life
Routine Inspection (Every 6 Months)
- Wipe the exposed piston rod with a clean, dry cloth to remove road dust, dirt, and salt; abrasive particles scratch the seal and cause leakage.
- Check mounting brackets and bolts for tightness; road vibration can loosen hardware and create misalignment.
- Inspect the rod for scratches, pitting, or corrosion; replace damaged units before they fail unexpectedly.
- On damped models, confirm the closing action still meets your requirement.
Do’s & Don’ts
✅ Do cycle the hatch periodically if the truck is parked for long periods, keeping seals lubricated.
✅ Do use a light silicone product only if specified, wiping away excess.
❌ Don’t apply oil, grease, WD-40, or petroleum lubricants to the piston rod; they attract dirt and degrade the seal.
❌ Don’t paint, powder coat, or coat the piston rod.
❌ Don’t expose struts to open flame or temperatures above their rated limit.
Storage
Store spare struts horizontally in a cool, dry place away from sunlight and corrosive chemicals, and never keep them fully compressed for extended periods.
Why Choose TieYing as Your Camper Shell Strut Supplier?
23+ Years of Gas Spring Engineering
Founded in 2002, TieYing has focused exclusively on gas spring design and manufacturing for more than two decades, building deep application knowledge across automotive, truck cap, RV, marine, and industrial markets.
Certified, Traceable Quality
Our factory operates under ISO 9001 and IATF 16949 quality systems. Camper shell struts are tested for cycle life, force consistency, leak integrity, and damping performance, with SGS test reports available on request, and all products are RoHS and REACH compliant. Every unit undergoes 100% inspection before shipment.
Scalable Capacity & Fast Lead Times
Our Guangzhou facility runs automated assembly lines with an annual output of millions of units, supporting fast shipment of standard sizes and dependable lead times for custom OEM production runs.
Global Export Experience
We supply customers in 56+ countries, including the USA, Germany, Australia, Canada, and the UK, handling export documentation, customs coordination, and flexible shipping terms including DDP to major markets.
Dedicated End-to-End Support
A dedicated account manager and engineering team support you from initial consultation and samples through after-sales service, with prompt responses to technical and commercial inquiries.





TieYing Factory Video Verified by SGS
Competitive Advantages of TieYing Gas Springs
| Item | TieYing Gas Springs (TieYing Supplier) | Standard Gas Springs (Other Supplier) |
|---|---|---|
| Certificate | SGS 200000 Cycles Durability Test, ROHS, T16949, IS09001 | Maybe just ISO9001 |
| Material | Top seamless steel (Full inspection by Professional testing equipment) | Maybe steel |
| Oil | Anti-wear hydraulic oil from Garmany | Maybe Semi-Synthetic |
| Piston Roughness | Up to Ra 0.696um | Maybe Ra 0.4um |
| Gas spring resistance | 100°C~-40°C | Maybe 60°C |
| Gas | 99.99% nitrogen | Maybe oxygen / Impure nitrogen |
| Uselife | 80,000-200,000 cycles with SGS test report | Maybe 50,000 cycles |
| Salt spray testing | Up to 96 hours | Maybe up to 12 hours |
| Inspection | All procedure sampling inspect, complete inspect before delivery | Maybe sampling inspection |
| Defective product | Re-produce new, If reach 10%, 100% items re-produce new | Maybe Repair |
Frequently Asked Questions (FAQ)
Which gas struts fit my camper shell rear door?
Match three parameters: the center-to-center extended length, the stroke, and the force rating, plus the end fitting. Most full-size fiberglass camper shells use two 15″ struts rated around 30–35 lb each. Send us your part number, dimensions, or a photo and we’ll confirm the exact fit.
Can you match LEER, A.R.E., SnugTop, or other truck cap brand struts?
Yes. We cross-reference the major camper shell brands and part numbers and supply direct equivalents with matching force, stroke, damping, and end fittings. Provide the original part number stamped on the old strut for the fastest match.
Why does my camper shell hatch slowly fall or won't stay open?
This means the struts have lost internal nitrogen pressure through seal wear or age. Cold weather can also temporarily reduce force. If the hatch still drifts in warm temperatures, replacement is needed. Always replace both struts together for balanced support.
How do I measure camper shell struts correctly?
Open the hatch fully and measure the distance between the centers of the two ball studs (mounting points), then measure the stroke from closed to open. Always measure center-to-center on the mounting points rather than end-to-end of the strut body.
Do I need two struts or just one?
Rear hatch doors are designed for two struts, one per side, to support the wide door evenly. Fitting only one causes uneven travel, hinge and glass stress, and unsafe holding. Side windows typically use a single small strut each.
Can I replace the struts myself?
Yes, most replacements take 10–15 minutes with a flathead screwdriver. Ball-socket struts clip off and on at the existing studs. Always prop the hatch securely open before starting.
Do you offer stainless steel or heavy-duty camper shell struts?
Yes. We offer 304/316 stainless struts for coastal and salt-road use, plus heavy-duty high-force models for commercial canopies and large custom hatches.
How long do camper shell struts last?
TieYing struts are rated for 150,000+ cycles under normal use. Actual lifespan depends on load, weather, temperature, and maintenance; proper rod-down orientation and regular cleaning maximize service life.
What is the minimum order quantity?
MOQs are flexible. Standard catalog sizes support small batch and sample orders, while fully custom struts typically begin at a low production MOQ. Contact us for exact terms.
Get Your Camper Shell Strut Quote Today
Whether you need direct replacement rear hatch struts, side window supports, pop-top assists, or high-volume OEM production for truck cap manufacturing, TieYing provides a complete solution:
- Free engineering consultation and force/fitment calculation
- OEM brand and part-number cross-referencing
- Samples for fit and hold-force validation
- Matched left/right pairs with optional soft-close damping
- Competitive factory-direct pricing and dependable lead times
- Global shipping and dedicated after-sales support
Contact our gas spring specialists with your camper shell details, part number, or required quantity. We’ll respond within 24 hours with a detailed specification and tailored recommendation.
