Custom Box Struts for Storage Boxes and Hinged Lids

Make Every Storage Box Easier to Open with Custom Gas Struts

TieYing manufactures custom box struts designed to assist the opening of hinged storage box lids and provide reliable support during everyday use. Our gas spring solutions are suitable for wooden storage chests, outdoor deck boxes, garden storage containers, patio cushion boxes, furniture storage units and other hinged-lid storage products.

A storage box lid may look simple, but its weight, dimensions, hinge position and opening angle all influence how easily it operates. The right gas strut helps product manufacturers develop a more convenient opening mechanism while maintaining a practical balance between lifting assistance, closing effort and installation space.

As an experienced gas spring manufacturer, TieYing provides customized gas spring specifications for storage box manufacturers, furniture brands and outdoor storage product manufacturers.

Our Custom Box Strut Solutions Include:

  • Customized lifting force for different lid weights
  • Stroke length and overall dimensions tailored to the box structure
  • Flexible end fittings and mounting configurations
  • Steel and stainless steel material options
  • OEM/ODM manufacturing and bulk supply support

What Are Box Struts?

Box struts are gas springs installed between the main body of a storage box and its hinged lid. They generate an extension force that assists the lifting movement and helps support the lid in its intended open position.

They are commonly used in storage products where a lid needs to be raised repeatedly to access the compartment underneath.

Inside a gas strut, compressed nitrogen creates pressure within a sealed cylinder. This pressure acts on an internal piston, producing an extension force through the piston rod. When installed between the box body and its lid, this force works against the gravitational moment generated by the lid.

The result is an assisted opening mechanism that can reduce manual lifting effort and make access to stored items more convenient.

However, a box strut is not simply selected according to the lid’s total weight. Its performance depends on the complete mechanical arrangement, including:

  • Lid weight and dimensions
  • Centre-of-gravity position
  • Hinge axis and opening direction
  • Gas spring mounting locations
  • Required opening angle
  • Available installation space
  • Desired opening and closing behaviour

For manufacturers developing storage products, these factors should be considered during the design stage rather than after the box structure has already been finalized.

TieYing works with OEM customers to review application requirements and discuss gas spring configurations suited to their storage box designs.

Box Struts for Different Storage Box Applications

Storage boxes are manufactured in many shapes, materials and sizes. A compact wooden chest for household storage has different requirements from a large outdoor deck box or an upholstered storage bench.

TieYing supports manufacturers developing different hinged-lid storage products with gas spring solutions adapted to their product structures.

1. Wooden Storage Boxes and Storage Chests

Wooden storage box with gas struts supporting the hinged lid

Wooden storage boxes are widely used in residential interiors, bedrooms, living rooms and commercial accommodation environments.

They may be designed to store blankets, cushions, clothing, toys, household accessories and seasonal items. Larger models often feature wide hinged lids that can become difficult to lift manually, especially when made from solid wood or reinforced panels.

Gas struts can assist the opening movement and help support the lid while users access the storage compartment.

For wooden storage box manufacturers, the mounting arrangement requires particular attention. The gas spring brackets should be attached to sufficiently strong structural sections, such as reinforced side panels or internal supporting frames.

The gas spring configuration should also allow the lid to reach its intended opening angle without placing unnecessary stress on the hinges or wooden structure.

TieYing can review the lid dimensions, approximate weight and available mounting space to discuss suitable gas spring specifications.

2. Outdoor Deck Storage Boxes

Outdoor deck storage box with gas spring lid supports

Outdoor deck boxes are commonly used on patios, balconies, terraces and garden areas. They provide convenient storage for outdoor cushions, gardening accessories, pool supplies and other household items.

These products often feature relatively large lids that need to be opened from the top.

A gas spring can make the lid easier to raise and help keep it supported during access. This is particularly useful for larger storage boxes where the lid may be difficult to hold manually.

Outdoor applications require additional consideration of environmental exposure. Rain, humidity, sunlight and temperature changes can affect the surrounding box structure and hardware.

Manufacturers should evaluate suitable cylinder materials, surface finishes, mounting hardware and corrosion protection according to the intended operating environment.

TieYing offers steel and stainless steel gas spring material options for different application requirements.

3. Patio Cushion Storage Boxes

Patio cushion storage box with hinged lid gas struts

Patio cushion storage boxes are designed to hold outdoor furniture cushions, seat pads and other accessories when they are not in use.

Their lids are often wide and relatively lightweight, but the dimensions may create a considerable gravitational moment around the hinge.

This means that two storage boxes with similar lid weights may require different gas spring configurations if their dimensions and mounting positions are different.

A suitable box strut arrangement should provide enough assistance to raise the lid while allowing users to close it without excessive effort.

For manufacturers producing outdoor furniture storage products, the gas spring should be integrated with the lid frame, hinge system and internal support structure.

4. Garden Storage Boxes

Garden Storage Box with Gas Struts Supporting the Open Lid

Garden storage boxes are used for storing hand tools, watering accessories, plant care products, outdoor supplies and other garden equipment.

They are commonly manufactured from plastic, resin, wood or metal, depending on the product design and intended market.

Gas struts can assist the opening of larger hinged lids and help provide convenient access to the contents.

For garden storage manufacturers, the gas spring selection should account for the lid material, structural stiffness, opening frequency and environmental exposure.

The mounting points must also be sufficiently reinforced to withstand repeated operating loads.

5. Plastic and Resin Storage Boxes

Plastic Resin Storage Box with Gas Struts Supporting the Open Lid

Plastic and resin storage boxes are popular because they can be manufactured in different shapes, sizes and finishes.

Unlike solid wooden or metal boxes, molded plastic storage boxes may have thinner side walls and integrated structural ribs.

This creates a specific mounting challenge: the gas spring force must be transferred into a structure capable of supporting the attachment loads.

A suitable design may require reinforced mounting areas, dedicated brackets or molded structural supports.

The gas spring dimensions should also be checked against the internal space available within the molded box.

For manufacturers developing plastic storage products, TieYing can review the proposed mounting arrangement and discuss suitable gas spring dimensions and connection configurations.

6. Toy Chests and Blanket Storage Boxes

White Toy and Blanket Storage Chest with Gas Struts Supporting the Open Lid

Toy chests and blanket storage boxes are designed for convenient access to frequently used household items.

They often feature a single large hinged lid that needs to remain accessible while the contents are being placed inside or removed.

Gas struts can assist the opening movement and help support the lid in its intended open position when correctly specified.

For these applications, product designers should pay attention to the opening and closing behaviour, exposed moving parts and potential pinch points.

A standard gas spring does not automatically provide soft-close functionality or a child-safety locking feature. Where controlled closing or additional protection is required, the complete mechanism should incorporate an appropriate damping or safety solution.

7. Ottoman Storage Boxes and Storage Benches

Upholstered Ottoman Storage Bench with Gas Struts Supporting the Lift-Up Lid

Ottoman storage boxes and lift-up storage benches combine seating functionality with concealed storage space.

Their moving sections may consist of an upholstered lid, a reinforced wooden frame, cushioning materials and attached hardware.

These additional components influence the total moving mass and centre of gravity.

Gas struts can assist the lifting movement while remaining concealed inside the furniture structure.

The main engineering challenge is to find a suitable balance between lifting assistance, available internal space, hinge geometry and the required opening angle.

For dedicated furniture mechanisms, TieYing also provides broader furniture gas spring solutions.

8. Metal Storage Chests for General Storage

metal storage chest gas struts

Some residential and commercial storage products use metal bodies and hinged lids to provide a durable storage structure.

These may include general-purpose storage chests, household utility boxes and purpose-built storage containers that are not designed specifically for tools or industrial equipment.

Metal lids can incorporate reinforced frames, handles and decorative components that affect their overall weight.

Gas struts can help manufacturers develop a more manageable opening mechanism while fitting into the available internal structure.

The mounting brackets, fasteners and surrounding metal panels should be evaluated according to the expected operating loads.

For other hinged covers, equipment enclosures and access panels, explore our gas shocks for hinged lids solutions.

Why Do Storage Box Manufacturers Use Gas Struts?

A storage box is more than a container. Its opening mechanism influences the overall user experience, product functionality and perceived quality.

For manufacturers developing storage products, gas struts provide several practical design advantages.

Reduced Lifting Effort

Large storage lids can be inconvenient to lift, particularly when they are made from solid wood, reinforced plastic or metal.

A correctly selected gas strut generates an assisting force that counteracts part of the lid’s gravitational moment.

This makes the opening movement more manageable without requiring users to support the full lid weight manually.

Convenient Access to the Storage Compartment

When users open a storage box, they often need both hands to organize or retrieve stored items.

A properly designed gas spring mechanism can help maintain the lid in its intended open position during normal access.

This is particularly useful for large outdoor storage boxes, blanket chests and furniture storage compartments.

More Practical Large-Lid Designs

Manufacturers may want to develop storage products with wider lids or deeper compartments without making them inconvenient to operate.

Gas struts provide additional flexibility when designing larger hinged storage products.

The gas spring force and mounting arrangement can be adapted to the lid geometry and required movement.

Integration Within the Box Structure

Gas struts can be installed along the internal sides of a storage box, depending on the available space and mounting arrangement.

This allows the lifting mechanism to remain relatively unobtrusive while preserving the main storage compartment.

For products with limited internal clearance, compact gas spring dimensions and suitable end fittings can help accommodate the installation.

Consistent Product Operation

Storage box manufacturers need their products to operate consistently across production units.

A confirmed gas spring specification, mounting position and assembly arrangement help create a repeatable opening mechanism.

This is important for OEM manufacturers producing storage boxes in larger quantities or supplying established retail brands.

Greater Design Flexibility

Different storage box designs require different combinations of force, stroke, overall length and connection hardware.

Custom gas spring specifications allow manufacturers to develop mechanisms around their own product dimensions rather than redesigning the box around an unsuitable standard component.

How Does a Gas Strut Work on a Storage Box Lid?

A storage box gas strut works by applying an extension force between the stationary box body and the moving lid.

The lid rotates around its hinge axis, while the gas spring extends or compresses as the distance between its two mounting points changes.

During this movement, the gas spring creates a supporting moment that helps counteract the gravitational moment of the lid.

Main Components of a Box Strut Mechanism

1. Storage Box Body

The stationary structure that carries one end of the gas spring. It must provide sufficient strength around the mounting point.

2. Hinged Lid

The moving section of the storage box. Its total moving mass includes the lid panel, reinforcement, handles and any attached components.

3. Hinge Axis

The fixed rotational axis around which the lid opens and closes.

4. Gas Spring Cylinder

The sealed pressure cylinder containing nitrogen gas and the internal piston assembly.

5. Piston Rod

The moving rod that transfers the gas spring’s extension force to the lid through the connection fitting.

6. Mounting Brackets and End Fittings

The components connecting the gas spring to the box body and lid. Their positions determine the available leverage and movement range.

Understanding the Opening Movement

When the lid is closed, its weight creates a gravitational moment around the hinge.

As the user begins opening the lid, the gas spring extends and applies a supporting force through its mounting points.

The effective leverage of the gas spring changes as the lid rotates.

For this reason, the gas spring must be selected according to the complete opening movement rather than a single position.

A suitable installation should be checked in the following positions:

  • Fully closed: Confirm that the gas spring fits within the available space and does not prevent the lid from closing.
  • Partially open: Check the available leverage and lifting assistance during the initial movement.
  • Fully open: Confirm that the lid reaches the intended opening angle without the gas spring reaching an unsuitable travel limit.

The lid should also have an appropriate mechanical stop where necessary. The gas spring should not be used as the sole mechanical stop or safety lock.

How to Choose the Right Box Struts for Your Storage Box?

Selecting a suitable gas strut requires more than knowing the weight of the lid.

The correct configuration depends on how the lid moves, where the gas spring is installed and how much assistance is required throughout the opening range.

TieYing recommends evaluating the following factors during storage box product development.

1. Total Moving Lid Weight

Start by determining the total weight of the moving lid assembly.

This should include:

  • Main lid panel
  • Reinforcement frame
  • Handles and decorative fittings
  • Attached hardware
  • Any other components that move with the lid

The gas spring must be selected according to the complete moving assembly, not just the main panel material.

2. Lid Dimensions and Centre of Gravity

The lid dimensions determine how its weight is distributed around the hinge.

The centre of gravity is the effective point at which the lid’s total weight acts.

For a uniform rectangular lid, the centre of gravity may be approximately at its geometric centre. However, additional reinforcement, handles, upholstery and other components can change its position.

The distance between the hinge axis and the centre of gravity directly affects the gravitational moment that the gas spring needs to counteract.

3. Hinge Position and Opening Angle

The hinge location determines the rotational path of the lid.

The required maximum opening angle influences how far the gas spring must extend and how its leverage changes during movement.

A storage box designed to open to approximately 70 degrees may require a different configuration from one designed to open beyond 90 degrees.

The hinge position and gas spring mounting points should therefore be evaluated together.

4. Gas Spring Force

Gas spring force is normally measured in Newtons (N).

It represents the extension force generated by the gas spring under specified measurement conditions.

The required force depends on:

  • Moving lid mass
  • Centre-of-gravity position
  • Gas spring mounting geometry
  • Number of gas springs
  • Required opening behaviour
  • Intended closing effort

A spring with insufficient force may not provide enough assistance. Excessive force can make the lid difficult to close and increase the loads transferred to the hinges, mounting brackets and box structure.

The objective is to achieve a suitable balance rather than simply selecting a higher-force gas spring.

5. Stroke Length

Stroke is the distance travelled by the piston rod between its compressed and extended positions.

The stroke must be sufficient to accommodate the change in distance between the gas spring mounting points as the lid opens.

An unsuitable stroke may restrict the opening angle or cause the gas spring to reach its travel limit before the lid reaches the intended mechanical stop.

6. Extended and Compressed Length

The extended length and compressed length determine the overall space required for the gas spring installation.

Both measurements should be checked against the mounting positions in the fully open and fully closed configurations.

The gas spring must fit inside the box without interfering with stored contents, hinges, handles or other internal components.

7. Number and Arrangement of Gas Springs

A storage box may use one gas spring or a pair, depending on the lid dimensions, weight distribution, structural stiffness and mounting geometry.

A single gas spring may suit certain smaller lids when the structure and mounting arrangement provide adequate support.

For wider lids, two appropriately matched gas springs may provide more balanced support when installed symmetrically.

However, the force of each spring must be calculated according to the actual arrangement. Two springs do not automatically share the load equally if their geometry or mounting positions differ.

8. Mounting Position and Available Space

The mounting position determines the effective moment arm of the gas spring.

A mounting point too close to the hinge may provide insufficient leverage, while an unsuitable position farther away may create clearance or stroke limitations.

The installation should be checked for:

  • Clearance around the cylinder and piston rod
  • Movement of end fittings
  • Interference with the hinge
  • Internal storage capacity
  • Bracket accessibility
  • Structural strength at attachment points

9. Box Material and Structural Strength

Different storage box materials have different mounting characteristics.

Wood: The attachment should be secured to sufficiently strong wood sections or reinforced areas.

Plastic and resin: Molded ribs or additional reinforcement may be needed around the mounting points.

Metal: The sheet thickness, brackets and fasteners must be suitable for the loads generated during operation.

Upholstered furniture: The gas spring must fit within the frame without interfering with upholstery or other internal components.

The gas spring should always be considered together with the supporting structure.

10. Operating Environment

Storage products may be installed indoors, in covered outdoor areas or in environments exposed directly to weather.

Consider:

  • Humidity and moisture exposure
  • Rain and water splash
  • Temperature variation
  • Corrosion risk
  • Cleaning chemicals
  • Expected operating frequency

TieYing can discuss suitable steel and stainless steel gas spring options according to the application and required environmental protection.

11. Expected Operating Frequency

A storage box opened occasionally has different operating requirements from one used several times every day.

Manufacturers should consider the expected number of opening and closing cycles when specifying the gas spring and its supporting hardware.

The hinges, brackets, fasteners and box structure should also be evaluated as part of the complete mechanism.

12. Opening, Closing and Safety Requirements

A standard compression gas spring provides extension force and lifting assistance.

It does not automatically provide:

  • A dedicated soft-close function
  • A positive mechanical locking function
  • A child-safety locking mechanism
  • Independent support for maintenance work

If a storage box requires controlled closing, an appropriate damper or damping mechanism should be considered.

For heavy lids, independent mechanical safety support may be necessary where a person could be exposed to the area beneath an open lid.

Box Strut Force Calculation

Box Strut Force Calculation

Correct gas spring force selection is essential for achieving suitable opening assistance and reliable lid support.

The basic calculation principle is to balance the gravitational moment generated by the storage box lid with the supporting moment produced by the gas springs.

For an initial static estimate, the required gas spring force can be calculated at the fully open lid position using the following relationship:

F = (m × g × dᶜ) / (n × dˢ)

Where:

  • F = Required force of each gas spring (N)
  • m = Total moving lid mass (kg)
  • g = Gravitational acceleration (9.81 m/s²)
  • dᶜ = Perpendicular distance from the hinge axis to the centre-of-gravity load line at the fully open lid position (m)
  • n = Number of gas springs
  • dˢ = Perpendicular distance from the hinge axis to the gas spring force line at the fully open lid position (m)

Example: Calculating the Required Force for a Storage Box Lid

Assume a wooden storage box has the following design parameters:

Design Parameter Value
Total moving lid mass 10 kg
Gravitational acceleration 9.81 m/s²
Centre-of-gravity moment arm 0.25 m
Number of gas springs 2
Gas spring moment arm 0.10 m

Substituting the values into the formula:

F = (10 × 9.81 × 0.25) / (2 × 0.10)

F = 122.63 N per gas spring

This result represents the theoretical static force required from each gas spring to balance the lid’s gravitational moment at the specified fully open position.

Important Engineering Considerations

This calculation provides an initial static force estimate based on the fully open lid geometry. It assumes that the gas springs share the load equally and that hinge friction and other external forces are negligible.

In an actual storage box mechanism, the perpendicular distances change as the lid rotates. Gas spring output force also varies with piston position, temperature and internal pressure characteristics.

Therefore, final gas spring selection should consider:

  • The required opening assistance throughout the lid’s movement range.
  • Gas spring force progression and available stroke.
  • Mounting geometry and available installation space.
  • Hinge friction and desired closing resistance.
  • Suitable mechanical stops and mounting structure strength.

The gas spring should not be used as the mechanical stop for the lid. Adequate stroke allowance should be provided at the maximum opening position.

For OEM projects, prototype testing is recommended to verify opening effort, holding performance and closing behaviour before confirming the production specification.

To simplify the initial selection process, you can use our gas spring force calculator to estimate the required lifting force based on your storage box lid dimensions and mounting geometry.

Custom Box Strut Solutions from TieYing

custom box strut structure

Every storage box manufacturer has its own product dimensions, materials, lid construction and mounting arrangements.

A standard gas spring may not provide the correct combination of force, stroke and installation dimensions for every design.

TieYing supports custom gas spring development for storage box manufacturers, furniture brands and outdoor storage product manufacturers.

1. Customized Gas Spring Force

Different lid weights and mounting geometries require different force ratings.

We can review the application details and discuss an appropriate gas spring force according to the moving load, centre of gravity, hinge position and required opening behaviour.

2. Custom Stroke and Overall Length

Gas spring dimensions must match the available installation space and required lid movement.

Stroke, extended length and compressed length can be evaluated according to the box structure and intended opening angle.

3. Customized Cylinder and Piston Rod Dimensions

Cylinder and piston rod dimensions influence the gas spring’s construction and available product configuration.

These specifications can be discussed according to the required force, installation restrictions and mechanical design.

4. Flexible End Fittings

Different storage box structures require different connection arrangements.

Depending on the application, end fitting options can include:

  • Ball socket fittings
  • Eyelet fittings
  • Clevis or fork fittings
  • Threaded connections
  • Application-specific mounting brackets

The selected fittings must allow the gas spring to pivot correctly throughout the lid movement.

Different gas spring end fittings and mounting brackets can be selected or customized to match the box structure, attachment points and installation requirements.

5. Material Options for Different Environments

TieYing offers gas spring manufacturing options using seamless steel, stainless steel 304 and stainless steel 316, subject to the selected configuration.

Material and surface finish requirements should be evaluated according to the intended installation environment, especially for outdoor storage products exposed to moisture and corrosion risks.

6. Drawing-Based and Sample-Based Development

If you already have a storage box design, existing gas spring or technical drawing, our team can review the available information to understand the application.

For new product development, useful starting information includes:

  • Storage box photographs
  • Lid dimensions and approximate weight
  • Hinge position
  • Required opening angle
  • Available mounting space
  • Proposed gas spring attachment points

7. OEM/ODM and Bulk Manufacturing

TieYing works with OEM manufacturers, furniture brands, product developers, wholesalers and distributors.

We support customized gas spring specifications and bulk manufacturing discussions according to individual project requirements.

From initial product development to repeat production orders, our team can discuss the technical and commercial requirements of your storage box project.

Designing a Better Storage Box Gas Spring Installation

The gas spring itself is only one part of the complete opening mechanism.

A successful installation also depends on the box structure, hinges, mounting brackets and the movement path of the lid.

The following design considerations can help storage box manufacturers avoid common installation problems.

Reinforce the Gas Spring Attachment Areas

The mounting brackets transfer the gas spring reaction forces into the box structure.

Thin plastic panels, unsupported wooden sections or weak metal sheets may not provide sufficient attachment strength.

Where necessary, use suitable reinforcement plates, molded ribs or structural support sections.

Check the Complete Lid Movement

Do not determine the mounting points using only the fully open or fully closed position.

Check the gas spring geometry throughout the complete movement to identify potential interference and changes in leverage.

Avoid Using the Gas Spring as a Mechanical Stop

The lid should have a suitable mechanical stopping arrangement where required.

The gas spring should not be forced beyond its designed stroke or used as the sole component absorbing repeated lid-stop impacts.

Consider Symmetrical Installation for Wide Lids

For applications using two gas springs, the mounting positions should be designed to provide balanced support.

Correct alignment helps reduce uneven loading on the lid and hinges.

Protect the Internal Storage Space

The gas spring should be positioned so that it does not unnecessarily reduce the usable storage volume.

This is especially important for compact boxes, molded plastic products and furniture storage compartments.

Consider Pinch Points and User Interaction

The opening and closing mechanism should be reviewed for potential pinch points around hinges, brackets and moving panels.

For toy chests and other products intended for family use, appropriate product-level safety measures should be considered separately from the gas spring specification.

Common Storage Box Gas Strut Problems and Solutions

Incorrect gas spring selection or mounting geometry can affect how a storage box operates.

Understanding the possible causes helps manufacturers identify the correct design adjustment instead of simply increasing or decreasing the gas spring force.

The Storage Box Lid Is Difficult to Open

Possible causes include insufficient gas spring force, an unfavourable mounting position, excessive hinge friction or an incorrect estimate of the lid’s centre of gravity.

What to check:

  • Total moving lid weight
  • Centre-of-gravity location
  • Gas spring force rating
  • Mounting point positions
  • Hinge friction and alignment

The Lid Opens Too Quickly

Excessive gas spring force or an unsuitable mounting arrangement may cause the lid to rise too aggressively.

What to check:

  • Actual force requirement
  • Gas spring mounting geometry
  • Lid movement throughout the opening range
  • Whether an additional damping solution is required

The Lid Will Not Stay in Its Intended Open Position

The gas spring may not provide sufficient supporting moment at the required opening angle.

The mounting geometry may also create inadequate leverage in that position.

What to check:

  • Gas spring force
  • Perpendicular moment arm
  • Lid centre of gravity
  • Mounting position
  • Actual opening angle

The Lid Is Difficult to Close

Excessive gas spring force can increase the closing effort.

The mounting position may also produce excessive resistance near the closed position.

What to check:

  • Force rating
  • Gas spring leverage
  • Closing geometry
  • Hinge alignment
  • Complete movement range

The Lid Cannot Open to the Required Angle

An unsuitable stroke length or mounting arrangement may restrict the opening movement.

What to check:

  • Stroke length
  • Extended length
  • Mounting point locations
  • Mechanical lid stop
  • Clearance around the gas spring

The Gas Spring Interferes with Stored Items

This may occur when the installation has not been considered alongside the internal storage volume.

What to check:

  • Internal mounting position
  • Cylinder dimensions
  • Piston rod movement
  • End fitting clearance
  • Available storage space

The Box Structure Becomes Loose Around the Brackets

Repeated loading may cause the mounting area to loosen or deform if the supporting material is insufficient.

What to check:

  • Bracket attachment strength
  • Fastener selection
  • Structural reinforcement
  • Material thickness
  • Alignment of the mounting points

The Gas Spring Shows Corrosion or Performance Changes

Environmental exposure, damage or component wear may affect the gas spring’s performance.

What to check:

  • Cylinder and piston rod condition
  • Surface protection
  • Moisture exposure
  • Material selection
  • Existing product specifications

If a storage box mechanism does not operate as intended, it is important to review the complete installation rather than automatically replacing the gas spring with a higher-force model.

Why Choose TieYing as Your Box Strut Manufacturer?

For storage box manufacturers, selecting a gas spring supplier is not only about finding a suitable component.

You also need a manufacturing partner who can understand your application, work with your technical requirements and support repeat product supply.

TieYing provides gas spring manufacturing and customization services for OEM customers, distributors and wholesalers worldwide.

1. More Than Two Decades of Gas Spring Manufacturing Experience

Founded in 2002, Guangzhou TieYing Spring Technology Co., Ltd. specializes in the design, development and manufacturing of gas springs and dampers.

Our experience covers different industrial, automotive, furniture and equipment applications.

2. OEM and ODM Customization

We understand that different storage box designs require different gas spring configurations.

TieYing supports customized force, dimensions, stroke lengths, materials and connection arrangements according to project requirements.

3. IATF 16949 Certified Manufacturing

TieYing operates under an IATF 16949 certified quality management system, supported by established manufacturing and quality control processes.

Our website also provides information about ISO 9001 certification and product testing documentation.

4. Established Manufacturing Capacity

TieYing’s manufacturing operation covers approximately 5,855 m², including a 1,200 m² manufacturing facility.

With an annual production capacity of up to 3.6 million gas springs, we support OEM manufacturers and international buyers requiring ongoing product supply.

5. Material Options for Different Applications

TieYing offers seamless steel, stainless steel 304 and stainless steel 316 gas spring options, depending on the selected product configuration.

This allows material requirements to be considered according to the intended application and operating environment.

6. Quality Control and Product Testing

Product consistency is important for storage box manufacturers producing in repeated batches.

TieYing’s quality management and inspection processes include production control, pressure-related inspection, sealing checks, appearance checks and final product review.

The company also lists SGS durability testing documentation, including a 200,000-cycle test report.

Product-specific test requirements and available documentation can be discussed during the quotation process.

7. International OEM and Wholesale Cooperation

TieYing supplies gas spring solutions to customers in international markets and supports OEM, ODM and wholesale cooperation.

Whether you are developing a new storage box design or sourcing gas springs for an established product range, our team can discuss your technical requirements and purchasing plans.

TieYing Factory Photos Show

factory photos

TieYing Factory Gas Springs Production Flow

factory production
factory production process

TieYing Factory Certifications & Quality Assurance

Factory Management System Certifications:
ISO 9001 – Quality Management System;IATF 16949 – Automotive Quality Management System
Product Testing & Compliance:
SGS – 200,000-Cycle Durability Test;RoHS – Restriction of Hazardous Substances

certificates 2

TieYing Factory Video Verified by SGS

Competitive Advantages of TieYing Factory Gas Springs

Item TieYing Gas Springs Standard Gas Springs (Other Supplier)
Certificate SGS 200000 Cycles Durability Test, ROHS, T16949, IS09001 Maybe just ISO9001
Material Top seamless steel (Full inspection by Professional testing equipment) Maybe steel
Oil Anti-wear hydraulic oil from Garmany Maybe Semi-Synthetic
Piston Roughness Up to Ra 0.696um Maybe Ra 0.4um
Gas spring resistance 100°C~-40°C Maybe 60°C
Gas 99.99% nitrogen Maybe oxygen / Impure nitrogen
Uselife 80,000-200,000 cycles with SGS test report Maybe 50,000 cycles
Salt spray testing Up to 96 hours Maybe up to 12 hours
Inspection All procedure sampling inspect, complete inspect before delivery Maybe sampling inspection
Defective product Re-produce new, If reach 10%, 100% items re-produce new Maybe Repair

Our OEM Box Strut Development Process

Developing a suitable gas spring solution starts with understanding the storage box structure and the required lid movement.

TieYing follows a practical cooperation process to help customers establish the required specifications before production.

Step 1: Share Your Storage Box Design

Provide photographs, product drawings or a description of your storage box.

Let us know which lid requires lifting assistance and how the box is intended to operate.

Step 2: Provide the Main Dimensions

Share the approximate lid weight, width, depth, hinge position, opening angle and available mounting space.

If an existing gas spring is being replaced, provide its dimensions and force rating if known.

Step 3: Review the Application Requirements

Our team can review the information and discuss suitable gas spring force, stroke, overall length, materials and end fitting configurations.

Step 4: Confirm the Proposed Specification

Review the proposed product dimensions and connection details to ensure they are compatible with the storage box structure.

Where required, additional measurements or application information may be requested.

Step 5: Evaluate Samples

Samples can be used to check installation compatibility, opening assistance, closing effort, clearance and the complete lid movement.

Step 6: Confirm Production Requirements

After the product configuration is approved, confirm the required quantities, specifications, packaging and other OEM requirements.

Step 7: Manufacturing and Quality Inspection

Production follows the agreed specifications and applicable quality control procedures before products are prepared for shipment.

What Information Should You Provide for a Box Strut Quote?

Providing accurate application information helps TieYing understand your storage box design and evaluate a suitable gas spring configuration.

You do not need to know every technical specification before contacting us. The following details provide a useful starting point.

Storage Box Information

  • Type of storage box
  • Intended product application
  • Box material and construction
  • Product photographs or technical drawings

Lid Information

  • Total moving lid weight
  • Lid width, depth and thickness
  • Centre-of-gravity position, if known
  • Hinge type and location
  • Required maximum opening angle

Gas Spring Requirements

  • Number of gas springs
  • Required force, if known
  • Stroke length
  • Extended length
  • Compressed length
  • Cylinder and piston rod dimensions
  • End fittings and mounting brackets

Operating Environment

  • Indoor or outdoor installation
  • Exposure to rain, humidity or other environmental conditions
  • Expected opening frequency
  • Required corrosion protection
  • Desired opening and closing behaviour

Purchasing Requirements

  • Estimated sample quantity
  • Initial order quantity
  • Expected annual demand, if available
  • OEM branding and packaging requirements
  • Target production schedule

Not sure which gas spring specifications you need?

Send TieYing a few photographs of your storage box together with the lid dimensions and approximate weight. Our team can review the available information and help identify the additional details needed for product selection.

Frequently Asked Questions About Box Struts

1. What are box struts used for?

Box struts are gas springs installed between a storage box body and its hinged lid. They provide lifting assistance and help support the lid in its intended open position, making storage compartments easier to access.

Gas struts can be used in wooden storage chests, outdoor deck boxes, patio cushion boxes, garden storage containers, plastic storage boxes, toy chests, blanket chests, metal storage chests and furniture storage units.

The suitable configuration depends on the lid dimensions, weight, hinge arrangement and available mounting space.

Yes. Gas struts can be installed on wooden storage boxes when the mounting brackets are attached to sufficiently strong structural sections.

The wood thickness, reinforcement and fastener arrangement should be considered to ensure that the mounting points can withstand the operating loads.

Yes. However, molded plastic boxes may require reinforced mounting areas or dedicated support brackets.

The gas spring should be selected according to the lid weight, geometry and available installation space, while the plastic structure must be suitable for the attachment loads.

The number depends on the lid dimensions, weight distribution, structural stiffness and mounting geometry.

Some storage boxes can use one gas spring, while wider lids may benefit from two appropriately matched springs installed symmetrically.

The required force per spring must be evaluated for the actual configuration.

The initial force can be estimated by balancing the gravitational moment of the lid with the supporting moment of the gas spring.

The calculation considers the moving lid mass, gravitational acceleration, centre-of-gravity moment arm, gas spring moment arm and number of gas springs.

The final specification should also be checked across the complete opening range.

A correctly specified and installed gas spring can help support a storage box lid in its intended open position during normal use.

However, a standard gas spring is not a positive mechanical safety lock. Heavy lids requiring secure support during servicing or maintenance may need an independent mechanical support.

Not automatically. Standard compression gas springs provide extension force and lifting assistance, but they do not necessarily control the lid’s closing speed.

If a storage box requires a soft-close or controlled-closing function, an appropriate damper or integrated damping mechanism should be considered.

Yes. Gas struts can be used for outdoor storage boxes when the material, surface finish and mounting hardware are suitable for the actual environmental exposure.

Manufacturers should consider moisture, humidity, rain, temperature variation and corrosion requirements before confirming the product specification.

Yes. TieYing supports custom gas spring manufacturing based on application drawings, dimensions, existing samples and technical requirements.

Customized force, stroke, overall length, materials and end fittings can be discussed according to the selected product configuration.

Yes, but the replacement should match the required force, stroke, extended length, compressed length and end fittings.

The existing mounting geometry should also be checked to ensure that the replacement provides suitable movement throughout the lid’s opening range.

Simply matching the physical length of an old gas spring may not be sufficient.

TieYing offers gas spring manufacturing options using seamless steel, stainless steel 304 and stainless steel 316, depending on the selected configuration.

The appropriate material should be evaluated according to the storage box design and intended operating environment.

Yes. TieYing provides OEM/ODM and wholesale gas spring manufacturing services for international customers.

Storage box manufacturers, furniture brands, outdoor product manufacturers, wholesalers and distributors can discuss customized specifications and bulk purchasing requirements with our team.

The most useful starting information includes the storage box type, lid dimensions, approximate lid weight, hinge position, required opening angle and available mounting space.

Photographs, drawings and existing gas spring samples can also help our team understand your project.

Looking for a Custom Box Strut Manufacturer?

The right gas spring can make a significant difference to how a storage box operates.

From wooden storage chests and outdoor deck boxes to patio storage units and furniture storage products, every design requires a suitable combination of lifting force, stroke, dimensions and mounting configuration.

TieYing manufactures customized gas springs for storage box manufacturers, furniture brands and outdoor storage product manufacturers worldwide.

Whether you are developing a new product, improving an existing lid mechanism or sourcing gas springs for ongoing OEM production, we are ready to discuss your requirements.

Share your storage box drawings, lid dimensions or existing gas spring sample with TieYing. Let our team help you develop a suitable gas spring solution for your product.

TieYing – Your Professional Gas Spring Manufacturing Partner Since 2002.

WeChat QR Code

Scan to add us on WeChat

Request a Quote